Welcome to Anything Boating
Thursday, March 11 2010 @ 03:26 AM EST

Marine Safety

Fume Detectors

Xintex S2-A Propane / CNG Monitor and Control

Model: S-2A | Sku: CWR-28162 | Weight: 1.6

S-2A Propane / CNG Monitor and Control
The S-2A propane monitor / controller features include low current draw, plug-in sensors (second sensor optional), display module fault light / alarm and fault light / alarm to indicate a malfunction in either one of the sensors. (Fault indicators show that the module or sensors are not working and may need repair.)
MS-2 sensor and 1 SV-1 solenoid valve included.
The system is calibrated at 20% LEL (lower explosive limit) to eliminate most nuisance alarms while allowing enough time to take action.
A microprocessor-controlled two-channel monitor with automatic solenoid valve on / off switch
A "press to test" button for each channel confirms function
Module size: 4-3/4" x 3-3/4" x 7/8"

Price:$394.10

Xintex S-1A-NV 2" Square Bezel Propane Detector w/ Plug-In Sensor (Does NOT include valve)

Model: S-1A-NV | Sku: CWR-28161 | Weight: 0.9

S-1A-NV Propane Detector w/ Plug-In Sensor
(Does NOT include valve)
This is a simple, single channel propane fume detector that features a plug-in sensor and a Var-A-Brite indicator lamp that brightens during the day and soften at night.
Complete unit includes display module, one propane sensor and 20 feet of connector wire.
The standard two-inch display module features a circuitry test and alarm horn silence function
On / off switcch opens and closes solenoid with the touch of a button

Price:$248.42

Xintex S-1A 2" Square Bezel Propane Detector w/ Plug-In Sensor and Solenoid Valve

Model: S-1A | Sku: CWR-28160 | Weight: 1.4

S-1A Propane Detector w/ Plug-In Sensor and Solenoid Valve
This is a simple, single channel propane fume detector that features a plug-in sensor and a Var-A-Brite indicator lamp that brightens during the day and soften at night.
Complete unit includes display module, one propane sensor and 20 feet of connector wire.
The standard two-inch display module features a circuitry test and alarm horn silence function
On / off switch opens and closes solenoid with the touch of a button

Price:$320.63

Xintex Carbon Monoxide Detector

Model: CMD-4MR | Sku: CWR-28164 | Weight: 0.4

Model CMD-4MR

Use the CMD-4MR carbon monoxide detector for single sites when generator shutdown is NOT desired. 12 VDC operation. Features a state-of-the-art sensor that is unaffected by common cleaning solvents. Lowest current draw of any Fireboy-Xintex CO Detector. UL 2034 Listed for Marine use.

Price:$166.96

Xintex Carbon Monoxide Detector

Model: CMD-4MR-RLY | Sku: CWR-28165 | Weight: 0.4

Model CMD-4MR-RLY

The CMD-4MR-RLY is the most advanced CO detector available from Fireboy-Xintex.

It features automatic generator shutdown capability.
When dangerous CO levels are detected, the CMD-4MR-RLY shuts down the generator, a common source of CO.
This detector also features multiple location warning, allowing up to six detectors to be linked in series. When one detector alarms, all connected detectors will alarm to alert boat inhabitants in other locations to the presence of CO. Features a state-of-the-art sensor that is unaffected by common cleaning solvents.
12 VDC operation
Low current draw
UL 2034 Listed for Marine use.

Price:$202.08

Xintex M-1-R 2" Gasoline Fume Detector w/ Plug-In Sensor

Model: M-1R | Sku: CWR-10502 | Weight: 0.8

M-1-R Gasoline Fume Detector

An ideal single channel gasoline fume detector, the M-1-R features high-tech styling, compact size, circuitry Test and alarm horn Mute functions.
The power on indicator lamp automatically increases in brightness during daylight and softens at night.
The M-1-R package includes a standard two-inch display unit with gasoline sensor and twenty feet of plug-together lead.
In addition to gas fumes, the M-1-R can also detect high concentrations of battery hydrogen or engine exhaust
Installation is quick and simple
Available in black
2" gauge

Price:$238.57

Xintex M-2A-R 2 Channel Gasoline Fume Detector

Model: M-2A-R | Sku: CWR-10503 | Weight: 1.1

M-2A-R Gasoline Fume Detector

The M-2A-R gas fume detector features include two-channel monitoring capability, plug-in sensors (second sensor optional), fault light alarm, fault lights to indicate a malfunction in either the module or one of the sensors.
A "press to test" button for each channel indicates either an OK or Danger condition.
An Alarm Silence button deactivates the alarm horn.
A microprocessor-controlled, two-channel gasoline fume detector in a low profile, water resistant design.
The system is calibrated to eliminate most nuisance alarms while allowing enough time to take action.

Price:$393.28

Xintex MB-1-R Gasoline Fume Detector

Model: MB-1-R | Sku: CWR-10505 | Weight: 1

MB-1-R Gasoline Fume Detector

Single channel gasoline fume detector, with the same features as the M-1-R:
High-tech styling
Compact size
Circuitry Test
Alarm horn mute functions
Standard two-inch display unit with gasoline sensor and twenty feet of plug-together lead.
The MB-1-R adds a 10 amp relay to automatically start the bilge blower fan should gasoline fumes be detected. Installation requires only the addition of two wire leads from the control to the blower switch. To test, simply touch the test pad on the control: the red alert lamp will glow, the alarm horn will sound and the blower motor will start.
The system works with power requirements of up to ten amps at 12 VDC.
In addition to gas fumes, the MB-1-R can also detect high concentrations of battery hydrogen or engine exhaust
Indicator lamp automatically increases in brightness during daylight and softens at night

Price:$284.85

Xintex MB-2-R Gasoline Fume Detector

Model: MB-2-R | Sku: CWR-10506 | Weight: 1.2

MB-2-R Gasoline Fume Detector

Includes the features of the M-2A:
Microprocessor-controlled
Low profile, water resistant design
Two-channel monitoring capability
Plug-in sensors (second sensor optional)
Fault light alarm
Fault lights to indicate a malfunction in either the module or one of the sensors.
"Press to test" button for each channel indicates either an OK or Danger condition
The MB-2-R adds automatic bilge blower control. The blower is automatically started when a fume level of 16 to 20% LEL (lower explosive limit) is reached and remains on until fume level is safely lowered.
A 30 amp relay is standard.
The MB-2-R system also includes a test button at the display module to activate the warning lamp, alarm horn and blower motor
Alarm silence button deactivates the alarm horn calibrated to eliminate most nuisance alarms while allowing enough time to take action

Price:$485.48

Xintex MS-2 Gasoline & Propane Sensor

Model: MS-2 | Sku: CWR-10510 | Weight: 1

MS-2 Gasoline and Propane Sensor
Replaces MS-1 and PS-1 sensors
Color-coded RED with a quick-disconnect 12-inch lead that connects to a standard 20-foot sensor cable for use with M-1, MB-1, M-2A, S-1, S-1A and S-2A fume detectors.
Plug-in connectors eliminate wire routing during installation or sensor replacement.
Available in red.
Gasoline & propane sensor with 12" lead and 20' sensor cable

Price:$99.02

Last Updated Friday, May 01 2009 @ 04:21 PM EDT|612 Hits